Running with gitlab-runner 15.3.0~beta.42.gdb7789ca (db7789ca)  on blue-5.shared.runners-manager.gitlab.com/default -AzERasQ section_start:1660309650:resolve_secrets Resolving secrets section_end:1660309650:resolve_secrets section_start:1660309650:prepare_executor Preparing the "docker+machine" executor Using Docker executor with image registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:master ... Authenticating with credentials from job payload (GitLab Registry) Pulling docker image registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:master ... Using docker image sha256:17a9299e78609d39b24a4fe76c1c02cb54daccd09b3efcd34bd08635020f35c7 for registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:master with digest registry.gitlab.com/libvirt/libvirt-ci/cirrus-run@sha256:059157f645426289d30bff34e13cea540a43dcd2918e378ced9baa050619f976 ... section_end:1660309658:prepare_executor section_start:1660309658:prepare_script Preparing environment Running on runner--azerasq-project-24336857-concurrent-0 via runner-azerasq-shared-1660309554-bca9befe... section_end:1660309659:prepare_script section_start:1660309659:get_sources Getting source from Git repository $ eval "$CI_PRE_CLONE_SCRIPT" Fetching changes with git depth set to 100... Initialized empty Git repository in /builds/nbdkit/libnbd/.git/ Created fresh repository. Checking out 08830296 as master... Skipping Git submodules setup section_end:1660309662:get_sources section_start:1660309662:step_script Executing "step_script" stage of the job script Using docker image sha256:17a9299e78609d39b24a4fe76c1c02cb54daccd09b3efcd34bd08635020f35c7 for registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:master with digest registry.gitlab.com/libvirt/libvirt-ci/cirrus-run@sha256:059157f645426289d30bff34e13cea540a43dcd2918e378ced9baa050619f976 ... $ source ci/cirrus/$NAME.vars $ sed -e "s|[@]CI_REPOSITORY_URL@|$CI_REPOSITORY_URL|g" -e "s|[@]CI_COMMIT_REF_NAME@|$CI_COMMIT_REF_NAME|g" -e "s|[@]CI_COMMIT_SHA@|$CI_COMMIT_SHA|g" -e "s|[@]CIRRUS_VM_INSTANCE_TYPE@|$CIRRUS_VM_INSTANCE_TYPE|g" -e "s|[@]CIRRUS_VM_IMAGE_SELECTOR@|$CIRRUS_VM_IMAGE_SELECTOR|g" -e "s|[@]CIRRUS_VM_IMAGE_NAME@|$CIRRUS_VM_IMAGE_NAME|g" -e "s|[@]UPDATE_COMMAND@|$UPDATE_COMMAND|g" -e "s|[@]UPGRADE_COMMAND@|$UPGRADE_COMMAND|g" -e "s|[@]INSTALL_COMMAND@|$INSTALL_COMMAND|g" -e "s|[@]PATH@|$PATH_EXTRA${PATH_EXTRA:+:}\$PATH|g" -e "s|[@]PKG_CONFIG_PATH@|$PKG_CONFIG_PATH|g" -e "s|[@]PKGS@|$PKGS|g" -e "s|[@]MAKE@|$MAKE|g" -e "s|[@]PYTHON@|$PYTHON|g" -e "s|[@]PIP3@|$PIP3|g" -e "s|[@]PYPI_PKGS@|$PYPI_PKGS|g" ci/cirrus/$NAME.yml $ cat ci/cirrus/$NAME.yml freebsd_instance: image_family: freebsd-13-0 env: CI_REPOSITORY_URL: "https://gitlab-ci-token:[MASKED]@gitlab.com/nbdkit/libnbd.git" CI_COMMIT_REF_NAME: "master" CI_COMMIT_SHA: "088302966296993ef49cfbbabf8303f342f9a324" PATH: "$PATH" PKG_CONFIG_PATH: "" PYTHON: "/usr/local/bin/python3" MAKE: "/usr/local/bin/gmake" build_task: install_script: - pkg update - pkg upgrade -y - pkg install -y autoconf automake bash-completion ca_root_nss ccache diffutils fusefs-libs3 git glib gmake gnutls go gsed jq libev libtool libxml2 nbd-server nbdkit ocaml ocaml-findlib p5-Pod-Simple perl5 pkgconf py39-flake8 python3 qemu valgrind - if test -n "" ; then /usr/local/bin/pip-3.8 install ; fi clone_script: - git clone --depth 100 "$CI_REPOSITORY_URL" . - git fetch origin "$CI_COMMIT_REF_NAME" - git reset --hard "$CI_COMMIT_SHA" build_script: - ci/build.sh $ cirrus-run -v --show-build-log always ci/cirrus/$NAME.yml build 5251575521214464: CREATED build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: EXECUTING build 5251575521214464: FAILED build 5251575521214464: FAILED build 5251575521214464: FAILED Build created: https://cirrus-ci.com/build/5251575521214464 Build failed, see log below: ## Task: build ## Task instruction: install pkg update Updating FreeBSD repository catalogue... FreeBSD repository is up to date. All repositories are up to date. pkg upgrade -y Updating FreeBSD repository catalogue... FreeBSD repository is up to date. All repositories are up to date. Updating database digests format: . done Checking for upgrades (24 candidates): .......... done Processing candidates (24 candidates): .......... done The following 31 package(s) will be affected (of 0 checked): New packages to be INSTALLED: libidn2: 2.3.2 libpsl: 0.21.1_4 libssh2: 1.10.0,3 libunistring: 1.0 mpdecimal: 2.5.1 py39-setuptools: 62.1.0_1 py39-sqlite3: 3.9.13_7 python39: 3.9.13 Installed packages to be UPGRADED: boost-libs: 1.72.0_3 -> 1.79.0_1 ca_root_nss: 3.58 -> 3.78 curl: 7.74.0 -> 7.84.0 expat: 2.2.10 -> 2.4.8 firstboot-freebsd-update: 1.2 -> 1.3 gdb: 10.1 -> 12.1 google-cloud-sdk: 321.0.0_1 -> 331.0.0 icu: 68.2,1 -> 71.1,1 json-c: 0.15_1 -> 0.16 libedit: 3.1.20191231,1 -> 3.1.20210910,1 libffi: 3.3_1 -> 3.4.2 libnghttp2: 1.42.0 -> 1.48.0 mpfr: 4.1.0 -> 4.1.0_1 py37-setuptools: 44.0.0 -> 62.1.0_1 py37-sqlite3: 3.7.9_7 -> 3.7.13_7 python: 3.7_3,2 -> 3.9_3,2 python27: 2.7.18_1 -> 2.7.18_2 python37: 3.7.9_1 -> 3.7.13_2 readline: 8.0.4 -> 8.1.2 source-highlight: 3.1.9_1 -> 3.1.9_2 sqlite3: 3.34.0,1 -> 3.38.5,1 sudo: 1.9.5p2 -> 1.9.11p3 Installed packages to be REINSTALLED: python3-3_3 (direct dependency changed: python39) Number of packages to be installed: 8 Number of packages to be upgraded: 22 Number of packages to be reinstalled: 1 The process will require 103 MiB more space. 109 MiB to be downloaded. [1/31] Fetching py39-setuptools-62.1.0_1.pkg: .......... done [2/31] Fetching libnghttp2-1.48.0.pkg: .......... done [3/31] Fetching py37-setuptools-62.1.0_1.pkg: .......... done [4/31] Fetching mpdecimal-2.5.1.pkg: .......... done [5/31] Fetching firstboot-freebsd-update-1.3.pkg: . done [6/31] Fetching python39-3.9.13.pkg: .......... done [7/31] Fetching libedit-3.1.20210910,1.pkg: .......... done [8/31] Fetching icu-71.1,1.pkg: .......... done [9/31] Fetching libidn2-2.3.2.pkg: .......... done [10/31] Fetching sqlite3-3.38.5,1.pkg: .......... done [11/31] Fetching source-highlight-3.1.9_2.pkg: .......... done [12/31] Fetching google-cloud-sdk-331.0.0.pkg: .......... done [13/31] Fetching py39-sqlite3-3.9.13_7.pkg: .... done [14/31] Fetching boost-libs-1.79.0_1.pkg: .......... done [15/31] Fetching python37-3.7.13_2.pkg: .......... done [16/31] Fetching libunistring-1.0.pkg: .......... done [17/31] Fetching libffi-3.4.2.pkg: ...... done [18/31] Fetching readline-8.1.2.pkg: .......... done [19/31] Fetching sudo-1.9.11p3.pkg: .......... done [20/31] Fetching py37-sqlite3-3.7.13_7.pkg: .... done [21/31] Fetching python-3.9_3,2.pkg: . done [22/31] Fetching libssh2-1.10.0,3.pkg: .......... done [23/31] Fetching libpsl-0.21.1_4.pkg: ........ done [24/31] Fetching python3-3_3.pkg: . done [25/31] Fetching gdb-12.1.pkg: .......... done [26/31] Fetching curl-7.84.0.pkg: .......... done [27/31] Fetching mpfr-4.1.0_1.pkg: .......... done [28/31] Fetching json-c-0.16.pkg: ......... done [29/31] Fetching expat-2.4.8.pkg: .......... done [30/31] Fetching ca_root_nss-3.78.pkg: .......... done [31/31] Fetching python27-2.7.18_2.pkg: .......... done Checking integrity... done (0 conflicting) [1/31] Installing mpdecimal-2.5.1... [1/31] Extracting mpdecimal-2.5.1: .......... done [2/31] Upgrading libffi from 3.3_1 to 3.4.2... [2/31] Extracting libffi-3.4.2: .......... done [3/31] Upgrading readline from 8.0.4 to 8.1.2... [3/31] Extracting readline-8.1.2: .......... done [4/31] Installing python39-3.9.13... [4/31] Extracting python39-3.9.13: .......... done [5/31] Upgrading libedit from 3.1.20191231,1 to 3.1.20210910,1... [5/31] Extracting libedit-3.1.20210910,1: .......... done [6/31] Upgrading icu from 68.2,1 to 71.1,1... [6/31] Extracting icu-71.1,1: .......... done [7/31] Installing libunistring-1.0... [7/31] Extracting libunistring-1.0: .......... done [8/31] Installing py39-setuptools-62.1.0_1... [8/31] Extracting py39-setuptools-62.1.0_1: .......... done [9/31] Installing libidn2-2.3.2... [9/31] Extracting libidn2-2.3.2: .......... done [10/31] Upgrading sqlite3 from 3.34.0,1 to 3.38.5,1... [10/31] Extracting sqlite3-3.38.5,1: .......... done [11/31] Upgrading boost-libs from 1.72.0_3 to 1.79.0_1... [11/31] Extracting boost-libs-1.79.0_1: .......... done [12/31] Upgrading python37 from 3.7.9_1 to 3.7.13_2... [12/31] Extracting python37-3.7.13_2: .......... done [13/31] Upgrading libnghttp2 from 1.42.0 to 1.48.0... [13/31] Extracting libnghttp2-1.48.0: .......... done [14/31] Upgrading py37-setuptools from 44.0.0 to 62.1.0_1... [14/31] Extracting py37-setuptools-62.1.0_1: .......... done [15/31] Upgrading source-highlight from 3.1.9_1 to 3.1.9_2... [15/31] Extracting source-highlight-3.1.9_2: .......... done [16/31] Installing py39-sqlite3-3.9.13_7... [16/31] Extracting py39-sqlite3-3.9.13_7: ........ done [17/31] Installing libssh2-1.10.0,3... [17/31] Extracting libssh2-1.10.0,3: .......... done [18/31] Installing libpsl-0.21.1_4... [18/31] Extracting libpsl-0.21.1_4: .......... done [19/31] Reinstalling python3-3_3... [19/31] Extracting python3-3_3: ...... done [20/31] Upgrading mpfr from 4.1.0 to 4.1.0_1... [20/31] Extracting mpfr-4.1.0_1: .......... done [21/31] Upgrading expat from 2.2.10 to 2.4.8... [21/31] Extracting expat-2.4.8: .......... done [22/31] Upgrading ca_root_nss from 3.58 to 3.78... [22/31] Extracting ca_root_nss-3.78: .......... done [23/31] Upgrading firstboot-freebsd-update from 1.2 to 1.3... [23/31] Extracting firstboot-freebsd-update-1.3: . done [24/31] Upgrading google-cloud-sdk from 321.0.0_1 to 331.0.0... [24/31] Extracting google-cloud-sdk-331.0.0: .......... done [25/31] Upgrading sudo from 1.9.5p2 to 1.9.11p3... [25/31] Extracting sudo-1.9.11p3: .......... done [26/31] Upgrading py37-sqlite3 from 3.7.9_7 to 3.7.13_7... [26/31] Extracting py37-sqlite3-3.7.13_7: ........ done [27/31] Upgrading python from 3.7_3,2 to 3.9_3,2... [27/31] Extracting python-3.9_3,2: ..... done [28/31] Upgrading gdb from 10.1 to 12.1... [28/31] Extracting gdb-12.1: .......... done [29/31] Upgrading curl from 7.74.0 to 7.84.0... [29/31] Extracting curl-7.84.0: .......... done [30/31] Upgrading json-c from 0.15_1 to 0.16... [30/31] Extracting json-c-0.16: .......... done [31/31] Upgrading python27 from 2.7.18_1 to 2.7.18_2... [31/31] Extracting python27-2.7.18_2: .......... done ===== Message from python39-3.9.13: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py39-gdbm databases/py-gdbm@py39 py39-sqlite3 databases/py-sqlite3@py39 py39-tkinter x11-toolkits/py-tkinter@py39 ===== Message from python27-2.7.18_2: -- ===> NOTICE: This port is deprecated; you may wish to reconsider installing it: EOLed upstream. It is scheduled to be removed on or after 2020-12-31. pkg install -y autoconf automake bash-completion ca_root_nss ccache diffutils fusefs-libs3 git glib gmake gnutls go gsed jq libev libtool libxml2 nbd-server nbdkit ocaml ocaml-findlib p5-Pod-Simple perl5 pkgconf py39-flake8 python3 qemu valgrind Updating FreeBSD repository catalogue... FreeBSD repository is up to date. All repositories are up to date. The following 152 package(s) will be affected (of 0 checked): New packages to be INSTALLED: adwaita-icon-theme: 40.1.1 argyllcms: 1.9.2_5 at-spi2-atk: 2.34.2 at-spi2-core: 2.36.0 atk: 2.36.0 autoconf: 2.71 autoconf-switch: 20220527 automake: 1.16.5 avahi-app: 0.8 bash: 5.1.16 bash-completion: 2.11_1,2 binutils: 2.37_2,1 cairo: 1.17.4_1,3 ccache: 3.7.12_3 colord: 1.3.5_2 cups: 2.4.2 cyrus-sasl: 2.1.28 dbus: 1.14.0,1 dbus-glib: 0.112 dejavu: 2.37_1 diffutils: 3.8 dtc: 1.6.0 encodings: 1.0.5,1 font-bh-ttf: 1.0.3_4 font-misc-ethiopic: 1.0.4 font-misc-meltho: 1.0.3_4 fontconfig: 2.13.94_2,1 freetype2: 2.12.1 fribidi: 1.0.12 fusefs-libs3: 3.11.0 gdbm: 1.23 gdk-pixbuf2: 2.40.0_4 git: 2.37.1 glib: 2.72.2,2 gmake: 4.3_2 gnome_subr: 1.0 gnutls: 3.7.6 go: 1.18,2 go118: 1.18.5 graphite2: 1.3.14 gsettings-desktop-schemas: 42.0 gtk-update-icon-cache: 3.24.31 gtk3: 3.24.33 harfbuzz: 4.4.1 hicolor-icon-theme: 0.17 jbigkit: 2.1_1 jpeg-turbo: 2.1.3 jq: 1.6 lcms2: 2.13.1 libICE: 1.0.10,1 libSM: 1.2.3,1 libX11: 1.7.2,1 libXScrnSaver: 1.2.3_2 libXau: 1.0.9 libXcomposite: 0.4.5,1 libXcursor: 1.2.0 libXdamage: 1.1.5 libXdmcp: 1.1.3 libXext: 1.3.4,1 libXfixes: 6.0.0 libXft: 2.3.4 libXi: 1.8,1 libXinerama: 1.1.4_2,1 libXrandr: 1.5.2 libXrender: 0.9.10_2 libXtst: 1.2.3_2 libXxf86vm: 1.1.4_3 libdaemon: 0.14_1 libdrm: 2.4.112_1,1 libepoll-shim: 0.0.20210418 libepoxy: 1.5.9 libev: 4.33,1 libevent: 2.1.12 libfontenc: 1.1.4 libglvnd: 1.4.0_2 libinotify: 20211018 liblz4: 1.9.3,1 libpaper: 1.1.28 libpcap: 1.10.1_1 libpciaccess: 0.16 libpthread-stubs: 0.4 librsvg2-rust: 2.54.1_2 libsigsegv: 2.14 libtasn1: 4.18.0 libtool: 2.4.7 libunwind: 20211201_1 libxcb: 1.15 libxkbcommon: 1.4.1 libxml2: 2.9.13_2 libxshmfence: 1.3_1 libyaml: 0.2.5 m4: 1.4.19,1 mesa-libs: 21.3.8 mkfontscale: 1.2.1 nbd-server: 3.24,1 nbdkit: 1.20.4_1 nettle: 3.8 nspr: 4.34.1 ocaml: 4.07.1 ocaml-findlib: 1.8.1 ocaml-labltk: 8.06.5 oniguruma: 6.9.8_1 p11-kit: 0.24.1_1 p5-Authen-SASL: 2.16_1 p5-CGI: 4.54 p5-Clone: 0.45 p5-Digest-HMAC: 1.04 p5-Encode-Locale: 1.05 p5-Error: 0.17029 p5-GSSAPI: 0.28_2 p5-HTML-Parser: 3.78 p5-HTML-Tagset: 3.20_1 p5-HTTP-Date: 6.05 p5-HTTP-Message: 6.37 p5-IO-HTML: 1.004 p5-IO-Socket-INET6: 2.72_1 p5-IO-Socket-SSL: 2.074 p5-LWP-MediaTypes: 6.04 p5-Mozilla-CA: 20211001 p5-Net-SSLeay: 1.92 p5-Pod-Simple: 3.43 p5-Socket6: 0.29 p5-TimeDate: 2.33,1 p5-URI: 5.10 pango: 1.50.7 pciids: 20220518 pcre: 8.45_1 pcre2: 10.40 perl5: 5.32.1_1 pixman: 0.40.0_1 pkgconf: 1.8.0,1 png: 1.6.37_1 polkit: 0.120_2 py39-flake8: 4.0.1 py39-mccabe: 0.7.0 py39-pycodestyle: 2.8.0 py39-pyflakes: 2.4.0 qemu: 7.0.0_1 sdl2: 2.0.22 shared-mime-info: 2.2_1 spidermonkey91: 91.8.0_3 tcl86: 8.6.12 tiff: 4.3.0 tk86: 8.6.12 valgrind: 3.19.0,1 vde2: 2.3.2_5 vte3: 0.68.0_1 wayland: 1.21.0 xkeyboard-config: 2.34_2 xorg-fonts-truetype: 7.7_1 xorgproto: 2022.1 zstd: 1.5.2 Number of packages to be installed: 152 The process will require 2 GiB more space. 370 MiB to be downloaded. [1/152] Fetching ccache-3.7.12_3.pkg: .......... done [2/152] Fetching png-1.6.37_1.pkg: .......... done [3/152] Fetching avahi-app-0.8.pkg: .......... done [4/152] Fetching p5-Net-SSLeay-1.92.pkg: .......... done [5/152] Fetching libxcb-1.15.pkg: .......... done [6/152] Fetching p5-IO-Socket-SSL-2.074.pkg: .......... done [7/152] Fetching p5-Pod-Simple-3.43.pkg: .......... done [8/152] Fetching freetype2-2.12.1.pkg: .......... done [9/152] Fetching jpeg-turbo-2.1.3.pkg: .......... done [10/152] Fetching libsigsegv-2.14.pkg: ... done [11/152] Fetching dbus-1.14.0,1.pkg: .......... done [12/152] Fetching pciids-20220518.pkg: .......... done [13/152] Fetching automake-1.16.5.pkg: .......... done [14/152] Fetching librsvg2-rust-2.54.1_2.pkg: .......... done [15/152] Fetching fusefs-libs3-3.11.0.pkg: .......... done [16/152] Fetching libfontenc-1.1.4.pkg: ... done [17/152] Fetching go-1.18,2.pkg: . done [18/152] Fetching libpthread-stubs-0.4.pkg: . done [19/152] Fetching libglvnd-1.4.0_2.pkg: .......... done [20/152] Fetching libXcursor-1.2.0.pkg: ..... done [21/152] Fetching p5-URI-5.10.pkg: .......... done [22/152] Fetching liblz4-1.9.3,1.pkg: .......... done [23/152] Fetching argyllcms-1.9.2_5.pkg: .......... done [24/152] Fetching cups-2.4.2.pkg: .......... done [25/152] Fetching libyaml-0.2.5.pkg: ......... done [26/152] Fetching ocaml-labltk-8.06.5.pkg: .......... done [27/152] Fetching nettle-3.8.pkg: .......... done [28/152] Fetching libXrandr-1.5.2.pkg: .... done [29/152] Fetching p5-CGI-4.54.pkg: .......... done [30/152] Fetching ocaml-findlib-1.8.1.pkg: .......... done [31/152] Fetching gmake-4.3_2.pkg: .......... done [32/152] Fetching libunwind-20211201_1.pkg: .......... done [33/152] Fetching lcms2-2.13.1.pkg: .......... done [34/152] Fetching zstd-1.5.2.pkg: .......... done [35/152] Fetching font-bh-ttf-1.0.3_4.pkg: .......... done [36/152] Fetching adwaita-icon-theme-40.1.1.pkg: .......... done [37/152] Fetching nbd-server-3.24,1.pkg: ........ done [38/152] Fetching tk86-8.6.12.pkg: .......... done [39/152] Fetching pango-1.50.7.pkg: .......... done [40/152] Fetching valgrind-3.19.0,1.pkg: .......... done [41/152] Fetching atk-2.36.0.pkg: .......... done [42/152] Fetching py39-pycodestyle-2.8.0.pkg: ........ done [43/152] Fetching polkit-0.120_2.pkg: .......... done [44/152] Fetching nspr-4.34.1.pkg: .......... done [45/152] Fetching pcre2-10.40.pkg: .......... done [46/152] Fetching p5-TimeDate-2.33,1.pkg: ..... done [47/152] Fetching mkfontscale-1.2.1.pkg: ... done [48/152] Fetching py39-pyflakes-2.4.0.pkg: .......... done [49/152] Fetching gtk-update-icon-cache-3.24.31.pkg: .......... done [50/152] Fetching p5-Clone-0.45.pkg: .. done [51/152] Fetching libXext-1.3.4,1.pkg: .......... done [52/152] Fetching libXxf86vm-1.1.4_3.pkg: ... done [53/152] Fetching fribidi-1.0.12.pkg: ....... done [54/152] Fetching p5-HTML-Tagset-3.20_1.pkg: .. done [55/152] Fetching git-2.37.1.pkg: .......... done [56/152] Fetching libXdamage-1.1.5.pkg: . done [57/152] Fetching libtasn1-4.18.0.pkg: .......... done [58/152] Fetching libdrm-2.4.112_1,1.pkg: .......... done [59/152] Fetching p5-Error-0.17029.pkg: .... done [60/152] Fetching vde2-2.3.2_5.pkg: .......... done [61/152] Fetching vte3-0.68.0_1.pkg: .......... done [62/152] Fetching libXfixes-6.0.0.pkg: .. done [63/152] Fetching p5-Authen-SASL-2.16_1.pkg: ...... done [64/152] Fetching p11-kit-0.24.1_1.pkg: .......... done [65/152] Fetching dbus-glib-0.112.pkg: .......... done [66/152] Fetching libXinerama-1.1.4_2,1.pkg: .. done [67/152] Fetching cyrus-sasl-2.1.28.pkg: .......... done [68/152] Fetching jq-1.6.pkg: .......... done [69/152] Fetching py39-flake8-4.0.1.pkg: .......... done [70/152] Fetching libxml2-2.9.13_2.pkg: .......... done [71/152] Fetching libXau-1.0.9.pkg: .. done [72/152] Fetching wayland-1.21.0.pkg: .......... done [73/152] Fetching libXcomposite-0.4.5,1.pkg: .. done [74/152] Fetching gnome_subr-1.0.pkg: . done [75/152] Fetching libICE-1.0.10,1.pkg: .......... done [76/152] Fetching dtc-1.6.0.pkg: .......... done [77/152] Fetching libtool-2.4.7.pkg: .......... done [78/152] Fetching p5-HTTP-Date-6.05.pkg: .. done [79/152] Fetching fontconfig-2.13.94_2,1.pkg: .......... done [80/152] Fetching pixman-0.40.0_1.pkg: .......... done [81/152] Fetching gdk-pixbuf2-2.40.0_4.pkg: .......... done [82/152] Fetching p5-Socket6-0.29.pkg: ... done [83/152] Fetching gnutls-3.7.6.pkg: .......... done [84/152] Fetching m4-1.4.19,1.pkg: .......... done [85/152] Fetching pcre-8.45_1.pkg: .......... done [86/152] Fetching libxshmfence-1.3_1.pkg: . done [87/152] Fetching hicolor-icon-theme-0.17.pkg: .. done [88/152] Fetching nbdkit-1.20.4_1.pkg: .......... done [89/152] Fetching gsettings-desktop-schemas-42.0.pkg: .......... done [90/152] Fetching at-spi2-core-2.36.0.pkg: .......... done [91/152] Fetching p5-GSSAPI-0.28_2.pkg: ..... done [92/152] Fetching libXScrnSaver-1.2.3_2.pkg: .. done [93/152] Fetching libepoll-shim-0.0.20210418.pkg: ... done [94/152] Fetching libpaper-1.1.28.pkg: ... done [95/152] Fetching libSM-1.2.3,1.pkg: ... done [96/152] Fetching go118-1.18.5.pkg: .......... done [97/152] Fetching libX11-1.7.2,1.pkg: .......... done [98/152] Fetching font-misc-ethiopic-1.0.4.pkg: .......... done [99/152] Fetching glib-2.72.2,2.pkg: .......... done [100/152] Fetching libXrender-0.9.10_2.pkg: .... done [101/152] Fetching xorgproto-2022.1.pkg: .......... done [102/152] Fetching colord-1.3.5_2.pkg: .......... done [103/152] Fetching p5-Encode-Locale-1.05.pkg: .. done [104/152] Fetching p5-IO-Socket-INET6-2.72_1.pkg: .. done [105/152] Fetching libXtst-1.2.3_2.pkg: ... done [106/152] Fetching perl5-5.32.1_1.pkg: .......... done [107/152] Fetching p5-HTML-Parser-3.78.pkg: .......... done [108/152] Fetching xkeyboard-config-2.34_2.pkg: .......... done [109/152] Fetching libev-4.33,1.pkg: .......... done [110/152] Fetching diffutils-3.8.pkg: .......... done [111/152] Fetching libXft-2.3.4.pkg: ......... done [112/152] Fetching oniguruma-6.9.8_1.pkg: .......... done [113/152] Fetching libxkbcommon-1.4.1.pkg: .......... done [114/152] Fetching font-misc-meltho-1.0.3_4.pkg: .......... done [115/152] Fetching gtk3-3.24.33.pkg: .......... done [116/152] Fetching libXi-1.8,1.pkg: .......... done [117/152] Fetching jbigkit-2.1_1.pkg: .......... done [118/152] Fetching spidermonkey91-91.8.0_3.pkg: .......... done [119/152] Fetching p5-LWP-MediaTypes-6.04.pkg: ... done [120/152] Fetching libepoxy-1.5.9.pkg: .......... done [121/152] Fetching cairo-1.17.4_1,3.pkg: .......... done [122/152] Fetching libdaemon-0.14_1.pkg: ..... done [123/152] Fetching at-spi2-atk-2.34.2.pkg: ........ done [124/152] Fetching p5-IO-HTML-1.004.pkg: .. done [125/152] Fetching p5-Mozilla-CA-20211001.pkg: .......... done [126/152] Fetching p5-Digest-HMAC-1.04.pkg: .. done [127/152] Fetching graphite2-1.3.14.pkg: .......... done [128/152] Fetching libXdmcp-1.1.3.pkg: .. done [129/152] Fetching pkgconf-1.8.0,1.pkg: ......... done [130/152] Fetching qemu-7.0.0_1.pkg: .......... done [131/152] Fetching tcl86-8.6.12.pkg: .......... done [132/152] Fetching shared-mime-info-2.2_1.pkg: .......... done [133/152] Fetching tiff-4.3.0.pkg: .......... done [134/152] Fetching libpcap-1.10.1_1.pkg: .......... done [135/152] Fetching encodings-1.0.5,1.pkg: .......... done [136/152] Fetching bash-completion-2.11_1,2.pkg: .......... done [137/152] Fetching sdl2-2.0.22.pkg: .......... done [138/152] Fetching bash-5.1.16.pkg: .......... done [139/152] Fetching p5-HTTP-Message-6.37.pkg: .......... done [140/152] Fetching xorg-fonts-truetype-7.7_1.pkg: . done [141/152] Fetching dejavu-2.37_1.pkg: .......... done [142/152] Fetching harfbuzz-4.4.1.pkg: .......... done [143/152] Fetching libevent-2.1.12.pkg: .......... done [144/152] Fetching binutils-2.37_2,1.pkg: .......... done [145/152] Fetching autoconf-switch-20220527.pkg: . done [146/152] Fetching ocaml-4.07.1.pkg: .......... done [147/152] Fetching mesa-libs-21.3.8.pkg: .......... done [148/152] Fetching autoconf-2.71.pkg: .......... done [149/152] Fetching py39-mccabe-0.7.0.pkg: .. done [150/152] Fetching libpciaccess-0.16.pkg: ... done [151/152] Fetching gdbm-1.23.pkg: .......... done [152/152] Fetching libinotify-20211018.pkg: .... done Checking integrity... done (0 conflicting) [1/152] Installing xorgproto-2022.1... [1/152] Extracting xorgproto-2022.1: .......... done [2/152] Installing libpthread-stubs-0.4... [2/152] Extracting libpthread-stubs-0.4: .... done [3/152] Installing libXau-1.0.9... [3/152] Extracting libXau-1.0.9: .......... done [4/152] Installing libXdmcp-1.1.3... [4/152] Extracting libXdmcp-1.1.3: ......... done [5/152] Installing png-1.6.37_1... [5/152] Extracting png-1.6.37_1: .......... done [6/152] Installing libxcb-1.15... [6/152] Extracting libxcb-1.15: .......... done [7/152] Installing freetype2-2.12.1... [7/152] Extracting freetype2-2.12.1: .......... done [8/152] Installing libfontenc-1.1.4... [8/152] Extracting libfontenc-1.1.4: ......... done [9/152] Installing libxml2-2.9.13_2... [9/152] Extracting libxml2-2.9.13_2: .......... done [10/152] Installing libICE-1.0.10,1... [10/152] Extracting libICE-1.0.10,1: .......... done [11/152] Installing pcre-8.45_1... [11/152] Extracting pcre-8.45_1: .......... done [12/152] Installing libX11-1.7.2,1... [12/152] Extracting libX11-1.7.2,1: .......... done [13/152] Installing jpeg-turbo-2.1.3... [13/152] Extracting jpeg-turbo-2.1.3: .......... done [14/152] Installing mkfontscale-1.2.1... [14/152] Extracting mkfontscale-1.2.1: ....... done [15/152] Installing libXext-1.3.4,1... [15/152] Extracting libXext-1.3.4,1: .......... done [16/152] Installing libXfixes-6.0.0... [16/152] Extracting libXfixes-6.0.0: .......... done [17/152] Installing fontconfig-2.13.94_2,1... [17/152] Extracting fontconfig-2.13.94_2,1: .......... done [18/152] Installing libepoll-shim-0.0.20210418... [18/152] Extracting libepoll-shim-0.0.20210418: .......... done [19/152] Installing libSM-1.2.3,1... [19/152] Extracting libSM-1.2.3,1: .......... done [20/152] Installing glib-2.72.2,2... [20/152] Extracting glib-2.72.2,2: .......... done [21/152] Installing jbigkit-2.1_1... [21/152] Extracting jbigkit-2.1_1: .......... done [22/152] Installing dbus-1.14.0,1... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. [22/152] Extracting dbus-1.14.0,1: ......... done [23/152] Installing libglvnd-1.4.0_2... [23/152] Extracting libglvnd-1.4.0_2: .......... done [24/152] Installing font-bh-ttf-1.0.3_4... [24/152] Extracting font-bh-ttf-1.0.3_4: .......... done [25/152] Installing nspr-4.34.1... [25/152] Extracting nspr-4.34.1: .......... done [26/152] Installing libtasn1-4.18.0... [26/152] Extracting libtasn1-4.18.0: .......... done [27/152] Installing wayland-1.21.0... [27/152] Extracting wayland-1.21.0: .......... done [28/152] Installing pixman-0.40.0_1... [28/152] Extracting pixman-0.40.0_1: .......... done [29/152] Installing font-misc-ethiopic-1.0.4... [29/152] Extracting font-misc-ethiopic-1.0.4: ...... done [30/152] Installing libXrender-0.9.10_2... [30/152] Extracting libXrender-0.9.10_2: .......... done [31/152] Installing perl5-5.32.1_1... [31/152] Extracting perl5-5.32.1_1: .......... done [32/152] Installing xkeyboard-config-2.34_2... [32/152] Extracting xkeyboard-config-2.34_2: .......... done [33/152] Installing font-misc-meltho-1.0.3_4... [33/152] Extracting font-misc-meltho-1.0.3_4: .......... done [34/152] Installing libXi-1.8,1... [34/152] Extracting libXi-1.8,1: .......... done [35/152] Installing graphite2-1.3.14... [35/152] Extracting graphite2-1.3.14: .......... done [36/152] Installing shared-mime-info-2.2_1... [36/152] Extracting shared-mime-info-2.2_1: ......... done [37/152] Installing tiff-4.3.0... [37/152] Extracting tiff-4.3.0: .......... done [38/152] Installing encodings-1.0.5,1... [38/152] Extracting encodings-1.0.5,1: .......... done [39/152] Installing dejavu-2.37_1... [39/152] Extracting dejavu-2.37_1: .......... done [40/152] Installing pciids-20220518... [40/152] Extracting pciids-20220518: ..... done [41/152] Installing nettle-3.8... [41/152] Extracting nettle-3.8: .......... done [42/152] Installing libXrandr-1.5.2... [42/152] Extracting libXrandr-1.5.2: .......... done [43/152] Installing p5-TimeDate-2.33,1... [43/152] Extracting p5-TimeDate-2.33,1: .......... done [44/152] Installing libXxf86vm-1.1.4_3... [44/152] Extracting libXxf86vm-1.1.4_3: .......... done [45/152] Installing fribidi-1.0.12... [45/152] Extracting fribidi-1.0.12: .......... done [46/152] Installing p11-kit-0.24.1_1... [46/152] Extracting p11-kit-0.24.1_1: .......... done [47/152] Installing dbus-glib-0.112... [47/152] Extracting dbus-glib-0.112: .......... done [48/152] Installing libXinerama-1.1.4_2,1... [48/152] Extracting libXinerama-1.1.4_2,1: .......... done [49/152] Installing gnome_subr-1.0... [49/152] Extracting gnome_subr-1.0: .... done [50/152] Installing gdk-pixbuf2-2.40.0_4... [50/152] Extracting gdk-pixbuf2-2.40.0_4: .......... done [51/152] Installing libXScrnSaver-1.2.3_2... [51/152] Extracting libXScrnSaver-1.2.3_2: .......... done [52/152] Installing libXtst-1.2.3_2... [52/152] Extracting libXtst-1.2.3_2: .......... done [53/152] Installing libXft-2.3.4... [53/152] Extracting libXft-2.3.4: .......... done [54/152] Installing libxkbcommon-1.4.1... [54/152] Extracting libxkbcommon-1.4.1: .......... done [55/152] Installing spidermonkey91-91.8.0_3... [55/152] Extracting spidermonkey91-91.8.0_3: .......... done [56/152] Installing cairo-1.17.4_1,3... [56/152] Extracting cairo-1.17.4_1,3: .......... done [57/152] Installing libdaemon-0.14_1... [57/152] Extracting libdaemon-0.14_1: .......... done [58/152] Installing xorg-fonts-truetype-7.7_1... [59/152] Installing harfbuzz-4.4.1... [59/152] Extracting harfbuzz-4.4.1: .......... done [60/152] Installing libevent-2.1.12... [60/152] Extracting libevent-2.1.12: .......... done [61/152] Installing gdbm-1.23... [61/152] Extracting gdbm-1.23: .......... done [62/152] Installing avahi-app-0.8... ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. [62/152] Extracting avahi-app-0.8: .......... done [63/152] Installing p5-URI-5.10... [63/152] Extracting p5-URI-5.10: .......... done [64/152] Installing liblz4-1.9.3,1... [64/152] Extracting liblz4-1.9.3,1: .......... done [65/152] Installing argyllcms-1.9.2_5... [65/152] Extracting argyllcms-1.9.2_5: .......... done [66/152] Installing lcms2-2.13.1... [66/152] Extracting lcms2-2.13.1: .......... done [67/152] Installing pango-1.50.7... [67/152] Extracting pango-1.50.7: .......... done [68/152] Installing atk-2.36.0... [68/152] Extracting atk-2.36.0: .......... done [69/152] Installing polkit-0.120_2... ===> Creating groups. Creating group 'polkitd' with gid '565'. ===> Creating users Creating user 'polkitd' with uid '565'. [69/152] Extracting polkit-0.120_2: ......... done [70/152] Installing gtk-update-icon-cache-3.24.31... [70/152] Extracting gtk-update-icon-cache-3.24.31: .......... done [71/152] Installing p5-Clone-0.45... [71/152] Extracting p5-Clone-0.45: ......... done [72/152] Installing p5-HTTP-Date-6.05... [72/152] Extracting p5-HTTP-Date-6.05: ....... done [73/152] Installing gnutls-3.7.6... [73/152] Extracting gnutls-3.7.6: .......... done [74/152] Installing at-spi2-core-2.36.0... [74/152] Extracting at-spi2-core-2.36.0: .......... done [75/152] Installing libpaper-1.1.28... [75/152] Extracting libpaper-1.1.28: .......... done [76/152] Installing p5-Encode-Locale-1.05... [76/152] Extracting p5-Encode-Locale-1.05: ....... done [77/152] Installing p5-LWP-MediaTypes-6.04... [77/152] Extracting p5-LWP-MediaTypes-6.04: ........ done [78/152] Installing p5-IO-HTML-1.004... [78/152] Extracting p5-IO-HTML-1.004: ....... done [79/152] Installing libpciaccess-0.16... [79/152] Extracting libpciaccess-0.16: ......... done [80/152] Installing librsvg2-rust-2.54.1_2... [80/152] Extracting librsvg2-rust-2.54.1_2: .......... done [81/152] Installing libXcursor-1.2.0... [81/152] Extracting libXcursor-1.2.0: .......... done [82/152] Installing cups-2.4.2... ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. [82/152] Extracting cups-2.4.2: .......... done [83/152] Installing libunwind-20211201_1... [83/152] Extracting libunwind-20211201_1: .......... done [84/152] Installing zstd-1.5.2... [84/152] Extracting zstd-1.5.2: .......... done [85/152] Installing adwaita-icon-theme-40.1.1... [85/152] Extracting adwaita-icon-theme-40.1.1: .......... done [86/152] Installing p5-HTML-Tagset-3.20_1... [86/152] Extracting p5-HTML-Tagset-3.20_1: ....... done [87/152] Installing libXdamage-1.1.5... [87/152] Extracting libXdamage-1.1.5: ......... done [88/152] Installing libdrm-2.4.112_1,1... [88/152] Extracting libdrm-2.4.112_1,1: .......... done [89/152] Installing libXcomposite-0.4.5,1... [89/152] Extracting libXcomposite-0.4.5,1: .......... done [90/152] Installing p5-Socket6-0.29... [90/152] Extracting p5-Socket6-0.29: ....... done [91/152] Installing libxshmfence-1.3_1... [91/152] Extracting libxshmfence-1.3_1: ......... done [92/152] Installing hicolor-icon-theme-0.17... [92/152] Extracting hicolor-icon-theme-0.17: . done [93/152] Installing gsettings-desktop-schemas-42.0... [93/152] Extracting gsettings-desktop-schemas-42.0: .......... done [94/152] Installing colord-1.3.5_2... ===> Creating groups. Creating group 'colord' with gid '970'. ===> Creating users Creating user 'colord' with uid '970'. [94/152] Extracting colord-1.3.5_2: .......... done [95/152] Installing libepoxy-1.5.9... [95/152] Extracting libepoxy-1.5.9: .......... done [96/152] Installing at-spi2-atk-2.34.2... [96/152] Extracting at-spi2-atk-2.34.2: .......... done [97/152] Installing tcl86-8.6.12... [97/152] Extracting tcl86-8.6.12: .......... done [98/152] Installing p5-HTTP-Message-6.37... [98/152] Extracting p5-HTTP-Message-6.37: .......... done [99/152] Installing binutils-2.37_2,1... [99/152] Extracting binutils-2.37_2,1: .......... done [100/152] Installing p5-Net-SSLeay-1.92... [100/152] Extracting p5-Net-SSLeay-1.92: .......... done [101/152] Installing libyaml-0.2.5... [101/152] Extracting libyaml-0.2.5: ......... done [102/152] Installing tk86-8.6.12... [102/152] Extracting tk86-8.6.12: .......... done [103/152] Installing pcre2-10.40... [103/152] Extracting pcre2-10.40: .......... done [104/152] Installing m4-1.4.19,1... [104/152] Extracting m4-1.4.19,1: .......... done [105/152] Installing p5-GSSAPI-0.28_2... [105/152] Extracting p5-GSSAPI-0.28_2: .......... done [106/152] Installing p5-IO-Socket-INET6-2.72_1... [106/152] Extracting p5-IO-Socket-INET6-2.72_1: ....... done [107/152] Installing p5-HTML-Parser-3.78... [107/152] Extracting p5-HTML-Parser-3.78: .......... done [108/152] Installing gtk3-3.24.33... [108/152] Extracting gtk3-3.24.33: .......... done [109/152] Installing p5-Mozilla-CA-20211001... [109/152] Extracting p5-Mozilla-CA-20211001: ........ done [110/152] Installing p5-Digest-HMAC-1.04... [110/152] Extracting p5-Digest-HMAC-1.04: .......... done [111/152] Installing libpcap-1.10.1_1... [111/152] Extracting libpcap-1.10.1_1: .......... done [112/152] Installing autoconf-switch-20220527... [112/152] Extracting autoconf-switch-20220527: .......... done [113/152] Installing ocaml-4.07.1... [113/152] Extracting ocaml-4.07.1: .......... done [114/152] Installing mesa-libs-21.3.8... [114/152] Extracting mesa-libs-21.3.8: .......... done [115/152] Installing libinotify-20211018... [115/152] Extracting libinotify-20211018: .......... done [116/152] Installing p5-IO-Socket-SSL-2.074... [116/152] Extracting p5-IO-Socket-SSL-2.074: .......... done [117/152] Installing libsigsegv-2.14... [117/152] Extracting libsigsegv-2.14: ........ done [118/152] Installing ocaml-labltk-8.06.5... [118/152] Extracting ocaml-labltk-8.06.5: .......... done [119/152] Installing p5-CGI-4.54... [119/152] Extracting p5-CGI-4.54: .......... done [120/152] Installing py39-pycodestyle-2.8.0... [120/152] Extracting py39-pycodestyle-2.8.0: .......... done [121/152] Installing py39-pyflakes-2.4.0... [121/152] Extracting py39-pyflakes-2.4.0: .......... done [122/152] Installing p5-Error-0.17029... [122/152] Extracting p5-Error-0.17029: ......... done [123/152] Installing vde2-2.3.2_5... [123/152] Extracting vde2-2.3.2_5: .......... done [124/152] Installing vte3-0.68.0_1... [124/152] Extracting vte3-0.68.0_1: .......... done [125/152] Installing p5-Authen-SASL-2.16_1... [125/152] Extracting p5-Authen-SASL-2.16_1: .......... done [126/152] Installing cyrus-sasl-2.1.28... *** Added group `cyrus' (id 60) *** Added user `cyrus' (id 60) [126/152] Extracting cyrus-sasl-2.1.28: .......... done [127/152] Installing dtc-1.6.0... [127/152] Extracting dtc-1.6.0: .......... done [128/152] Installing go118-1.18.5... [128/152] Extracting go118-1.18.5: .......... done [129/152] Installing oniguruma-6.9.8_1... [129/152] Extracting oniguruma-6.9.8_1: .......... done [130/152] Installing sdl2-2.0.22... [130/152] Extracting sdl2-2.0.22: .......... done [131/152] Installing bash-5.1.16... [131/152] Extracting bash-5.1.16: .......... done [132/152] Installing autoconf-2.71... [132/152] Extracting autoconf-2.71: .......... done [133/152] Installing py39-mccabe-0.7.0... [133/152] Extracting py39-mccabe-0.7.0: .......... done [134/152] Installing ccache-3.7.12_3... [134/152] Extracting ccache-3.7.12_3: .......... done Create compiler links... create symlink for cc create symlink for cc (world) create symlink for c++ create symlink for c++ (world) create symlink for CC create symlink for CC (world) create symlink for clang create symlink for clang (world) create symlink for clang++ create symlink for clang++ (world) [135/152] Installing p5-Pod-Simple-3.43... [135/152] Extracting p5-Pod-Simple-3.43: .......... done [136/152] Installing automake-1.16.5... [136/152] Extracting automake-1.16.5: .......... done [137/152] Installing fusefs-libs3-3.11.0... [137/152] Extracting fusefs-libs3-3.11.0: .......... done [138/152] Installing go-1.18,2... [138/152] Extracting go-1.18,2: .. done [139/152] Installing ocaml-findlib-1.8.1... [139/152] Extracting ocaml-findlib-1.8.1: .......... done [140/152] Installing gmake-4.3_2... [140/152] Extracting gmake-4.3_2: .......... done [141/152] Installing nbd-server-3.24,1... [141/152] Extracting nbd-server-3.24,1: .......... done [142/152] Installing valgrind-3.19.0,1... [142/152] Extracting valgrind-3.19.0,1: .......... done [143/152] Installing git-2.37.1... ===> Creating groups. Creating group 'git_daemon' with gid '964'. ===> Creating users Creating user 'git_daemon' with uid '964'. [143/152] Extracting git-2.37.1: .......... done [144/152] Installing jq-1.6... [144/152] Extracting jq-1.6: .......... done [145/152] Installing py39-flake8-4.0.1... [145/152] Extracting py39-flake8-4.0.1: .......... done [146/152] Installing libtool-2.4.7... [146/152] Extracting libtool-2.4.7: .......... done [147/152] Installing nbdkit-1.20.4_1... [147/152] Extracting nbdkit-1.20.4_1: .......... done [148/152] Installing libev-4.33,1... [148/152] Extracting libev-4.33,1: .......... done [149/152] Installing diffutils-3.8... [149/152] Extracting diffutils-3.8: .......... done [150/152] Installing pkgconf-1.8.0,1... [150/152] Extracting pkgconf-1.8.0,1: .......... done [151/152] Installing qemu-7.0.0_1... [151/152] Extracting qemu-7.0.0_1: .......... done [152/152] Installing bash-completion-2.11_1,2... [152/152] Extracting bash-completion-2.11_1,2: .......... done Compiling glib schemas Running fc-cache to build fontconfig cache... Building the Shared MIME-Info database cache Generating GIO modules cache Generating gdk-pixbuf modules cache Generating GTK icon cache for /usr/local/share/icons/hicolor Generating GTK icon cache for /usr/local/share/icons/Adwaita ===== Message from freetype2-2.12.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/index.html, if documentation was installed). ===== Message from wayland-1.21.0: -- Wayland requires XDG_RUNTIME_DIR to be defined to a path that will contain "wayland-%d" unix(4) sockets. This is usually handled by consolekit2 (via ck-launch-session) or pam_xdg (via login). ===== Message from dejavu-2.37_1: -- Make sure that the freetype module is loaded. If it is not, add the following line to the "Modules" section of your X Windows configuration file: Load "freetype" Add the following line to the "Files" section of X Windows configuration file: FontPath "/usr/local/share/fonts/dejavu/" Note: your X Windows configuration file is typically /etc/X11/XF86Config if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org. ===== Message from libxkbcommon-1.4.1: -- If arrow keys don't work under X11 switch to legacy rules e.g., For sh/bash/ksh/zsh run and (optionally) add into ~/.profile: export XKB_DEFAULT_RULES=xorg For csh/tcsh run and (optionally) add into ~/.login: setenv XKB_DEFAULT_RULES xorg ===== Message from libinotify-20211018: -- You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. ===== Message from libsigsegv-2.14: -- Note that the stackoverflow handling functions of this library need procfs mounted on /proc. ===== Message from vde2-2.3.2_5: -- ===> NOTICE: The vde2 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===== Message from cyrus-sasl-2.1.28: -- You can use sasldb2 for authentication, to add users use: saslpasswd2 -c username If you want to enable SMTP AUTH with the system Sendmail, read Sendmail.README NOTE: This port has been compiled with a default pwcheck_method of auxprop. If you want to authenticate your user by /etc/passwd, PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and set sasl_pwcheck_method to saslauthd after installing the Cyrus-IMAPd 2.X port. You should also check the /usr/local/lib/sasl2/*.conf files for the correct pwcheck_method. If you want to use GSSAPI mechanism, install ports/security/cyrus-sasl2-gssapi. If you want to use SRP mechanism, install ports/security/cyrus-sasl2-srp. If you want to use LDAP auxprop plugin, install ports/security/cyrus-sasl2-ldapdb. ===== Message from ccache-3.7.12_3: -- NOTE: Please read /usr/local/share/doc/ccache/ccache-howto-freebsd.txt for information on using ccache with FreeBSD ports and src. ===== Message from fusefs-libs3-3.11.0: -- Install the FUSE kernel module (kldload fusefs) to use this port. ===== Message from git-2.37.1: -- If you installed the GITWEB option please follow these instructions: In the directory /usr/local/share/examples/git/gitweb you can find all files to make gitweb work as a public repository on the web. All you have to do to make gitweb work is: 1) Please be sure you're able to execute CGI scripts in /usr/local/share/examples/git/gitweb. 2) Set the GITWEB_CONFIG variable in your webserver's config to /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi. 3) Restart server. If you installed the CONTRIB option please note that the scripts are installed in /usr/local/share/git-core/contrib. Some of them require other ports to be installed (perl, python, etc), which you may need to install manually. ===== Message from qemu-7.0.0_1: -- FreeBSD host notes ================== - Needs to set net.link.tap.user_open sysctl in order to use /dev/tap* networking as non-root. Don't forget to adjust device node permissions in /etc/devfs.rules. - Expect timer problems when guest kernel HZ is > hosts. The linux 2.6 kernel uses 1000 by default btw. (changed to 250 later, and recent linux kernels now no longer have a fixed HZ, aka `tickless kernel'...) Enabling /dev/rtc doesn't seem to help either (not included since it needs a patch to emulators/rtc.) - The -smb option (smb-export local dir to guest using the default slirp networking) needs the samba port/package installed in addition to qemu. (SAMBA knob.) - If you want to use usb devices connected to the host in the guest yot can use usbredir over the network (see below); also unless you are running qemu as root you then need to fix permissions for /dev/ugen* device nodes: if you are on 5.x or later (devfs) put a rule in /etc/devfs.rules, activate it in /etc/rc.conf and run /etc/rc.d/devfs restart. Example devfs.rules: [ugen_ruleset=20] add path 'ugen*' mode 660 group operator corresponding rc.conf line: devfs_system_ruleset="ugen_ruleset" - Still usb: since the hub is no longer attached to the uchi controller and the wakeup mechanism, resume interrupt is not implemented yet linux guests will suspend the bus, i.e. they wont see devices usb_add'ed after its (linux') uhci module got loaded. Workaround: either add devices before linux loads the module or rmmod and modprobe it afterwards. [Not sure if this still applies to the new libusb host code used on recent 10-current.] - If you get repeated `atapi_poll called!' console messages with FreeBSD guests or other weird cdrom problems then thats probably because the guest has atapicam loaded, which for reasons still to be determined has problems with qemu's now by default enabled cdrom dma. You can build the port with CDROM_DMA disabled to disable it. [Looks like this is fixed in recent FreeBSD guest versions.] - If you build qemu wihout SDL and then get crashes running it try passing it -nographic. This should probably be default in that case... - qemu's network boot roms (-boot n) have a bug when bootfiles sizes are a multiple of blksize, if this affects you (like with FreeBSD's /boot/pxeboot) you can do like cp /boot/pxeboot pxeboot-qemu && chmod +w pxeboot-qemu && echo >>pxeboot-qemu and then use pxeboot-qemu. Actually you need recent btx code (from after 7.0 was released) because of the real mode boot problem, so use at least pxeboot from there. And I just did that for the pxeboot extracted out of ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200805/7.0-STABLE-200805-i386-bootonly.iso and placed it here: http://people.freebsd.org/~nox/qemu/pxeboot-qemu - If you use slirp (usernet, the default) and want to mount nfs into the guest and you are not running qemu as root, then mountd(8) on the exporting box needs to be run with -n in order to accept requests from ports >= 1024. - (not FreeBSD-specific:) There have been reports of qcow2 corruption with (at least) win2k guests on recent kvm (which uses similar qcow2 code than qemu now, see this thread: http://lists.gnu.org/archive/html/qemu-devel/2009-02/msg00713.html - the consensus on that thread seems to be that qcow(2) code has always been experimental and you should use raw images if you want reliability; raw is also usually faster.) You should be able to migrate existing images to raw using qemu-img(1)'s convert function; raw doesn't support advanced features like snapshots tho. [a few important qcow2 bugfixed have been committed in the meantime so this _might_ be less of an issue now; and meanwhile there also is the new qed format - I don't know how stable that one is.] - (also not FreeBSD-specific:) It is recommended to pass raw images using the new -drive syntax, specifying format=raw explicitly in order to avoid malicious guests being able to exploit the format autodetection thats otherwise getting used. (Not that you should run malicious guests anyway, but this eleminates at least a known attack vector.) - qemu now has improved physical cdrom support, but still there is at least one known problem: you need to have the guest eject the disc if you want to change it/take it out, or otherwise the guest may continue using state (like size) of the old disc. (You can also do like `change ide1-cd0 /dev/acd0' in the monitor after taking out the disc if a guest cannot eject it itself.) ===== Message from bash-completion-2.11_1,2: -- To enable the bash completion library, add the following to your .bashrc file: [[ $PS1 && -f /usr/local/share/bash-completion/bash_completion.sh ]] && \ source /usr/local/share/bash-completion/bash_completion.sh See /usr/local/share/doc/bash-completion/README.md for more information. if test -n "" ; then /usr/local/bin/pip-3.8 install ; fi ## Task instruction: clone git clone --depth 100 "$CI_REPOSITORY_URL" . Cloning into '.'... git fetch origin "$CI_COMMIT_REF_NAME" From https://gitlab.com/nbdkit/libnbd * branch master -> FETCH_HEAD git reset --hard "$CI_COMMIT_SHA" HEAD is now at 0883029 states: Use RESYNC to handle more structured reply server bugs ## Task instruction: build ci/build.sh + main + MAKE=/usr/local/bin/gmake + autoreconf -if libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:23: installing './compile' configure.ac:28: installing './config.guess' configure.ac:28: installing './config.sub' configure.ac:27: installing './install-sh' configure.ac:27: installing './missing' common/include/Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' + CONFIG_ARGS='--enable-gcc-warnings --with-gnutls --with-libxml2 ' + test -n '' + CONFIG_ARGS='--enable-gcc-warnings --with-gnutls --with-libxml2 --enable-fuse --enable-ocaml --enable-python' + test '' '=' skip + CONFIG_ARGS='--enable-gcc-warnings --with-gnutls --with-libxml2 --enable-fuse --enable-ocaml --enable-python --enable-golang' + ./configure --enable-gcc-warnings --with-gnutls --with-libxml2 --enable-fuse --enable-ocaml --enable-python --enable-golang checking for gcc... no checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether cc accepts -g... yes checking for cc option to enable C11 features... none needed checking whether cc understands -c and -o together... yes checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... nawk checking whether /usr/local/bin/gmake sets $(MAKE)... yes checking whether /usr/local/bin/gmake supports the include directive... yes (GNU style) checking whether /usr/local/bin/gmake supports nested variables... yes checking dependency style of cc... gcc3 checking build system type... amd64-unknown-freebsd13.0 checking host system type... amd64-unknown-freebsd13.0 checking how to print strings... printf checking for a sed that does not truncate output... /usr/local/bin/gsed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/local/bin/nm -B checking the name lister (/usr/local/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 393216 checking how to convert amd64-unknown-freebsd13.0 file names to amd64-unknown-freebsd13.0 format... func_convert_file_noop checking how to convert amd64-unknown-freebsd13.0 file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/local/bin/nm -B output from cc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... yes checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... freebsd13.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for a sed that does not truncate output... (cached) /usr/local/bin/gsed checking whether the compiler supports GNU C... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to enable C11 features... (cached) none needed checking whether cc understands -c and -o together... (cached) yes checking how to run the C preprocessor... cc -E checking whether cc is Clang... yes checking whether pthreads work with "-pthread" and "-lpthread"... yes checking whether Clang needs flag to prevent "argument unused" warning when linking with -pthread... no checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking whether more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for g++... no checking for c++... c++ checking whether the compiler supports GNU C++... yes checking whether c++ accepts -g... yes checking for c++ option to enable C++11 features... none needed checking dependency style of c++... gcc3 checking how to run the C++ preprocessor... c++ -E checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC -DPIC checking if c++ PIC flag -fPIC -DPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... yes checking if c++ supports -c -o file.o... (cached) yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd13.0 ld.so checking how to hardcode library paths into programs... immediate checking if the C++ compiler really really works... yes checking whether the compiler supports -Wvla... yes checking whether the compiler supports -Wframe-larger-than=5000... yes checking whether the compiler supports -Wstack-usage=10000... no checking for cc options needed to detect all undeclared functions... -fno-builtin checking whether __builtin_add_overflow is declared... no checking whether __builtin_mul_overflow is declared... no checking if __auto_type is available in this compiler... yes checking for byteswap.h... no checking for endian.h... no checking for stdatomic.h... yes checking for sys/endian.h... yes checking for linux/vm_sockets.h... no checking for sys/vsock.h... no checking for posix_fadvise... yes checking for posix_memalign... yes checking for strerrordesc_np... no checking for valloc... yes checking whether sys_errlist is declared... yes checking for dlopen in -ldl... yes checking for dlfcn.h... (cached) yes checking if this is glibc >= 2.34... no checking for pkg-config... /usr/local/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GNUTLS... yes gnutls version is 3.7.6 checking for default TLS session priority string... NORMAL checking for gnutls/socket.h... yes checking for gnutls_session_set_verify_cert... yes checking for gnutls_transport_is_ktls_enabled... yes checking for certtool... certtool checking for psktool... psktool checking for LIBXML2... yes libxml2 version is 2.9.13 checking for nbdkit... no checking for nbd-server... nbd-server checking for qemu-nbd... qemu-nbd qemu-nbd version is qemu-nbd 7.0.0 checking for qemu-storage-daemon... qemu-storage-daemon checking for GLIB... yes glib2 version is 2.72.2 checking for LIBEV... yes libev version is 4.33 checking if the compiler is new enough for good aliasing rules... yes checking for FUSE... yes fuse3 version is 3.11.0 checking for perl... perl checking if we have perl Pod::Man and Pod::Simple... yes checking for BASH_COMPLETION... yes checking for bash-completions directory... /usr/local/share/bash-completion/completions checking for ocamlc... ocamlc OCaml version is 4.07.1 OCaml library path is /usr/local/lib/ocaml checking for ocamlopt... ocamlopt checking for ocamlc.opt... ocamlc.opt checking for ocamlopt.opt... ocamlopt.opt checking for ocaml... ocaml checking for ocamldep... ocamldep checking for ocamlmktop... ocamlmktop checking for ocamlmklib... ocamlmklib checking for ocamldoc... ocamldoc checking for ocamlbuild... no checking for ocamlfind... ocamlfind checking for caml_alloc_custom_mem... no checking for caml_alloc_initialized_string... yes checking for python3... /usr/local/bin/python3 checking Python version... 3.9 checking for PYTHON... yes checking Python prefix... /usr/local checking for Python site-packages path... /usr/local/lib/python3.9/site-packages checking for Python extension suffix (PEP-3149)... .cpython-39.so checking for go... go checking if go is usable... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating podwrapper.pl config.status: creating python/run-python-tests config.status: creating run config.status: creating sh/nbdsh config.status: creating Makefile config.status: creating bash-completion/Makefile config.status: creating common/include/Makefile config.status: creating common/utils/Makefile config.status: creating copy/Makefile config.status: creating docs/Makefile config.status: creating dump/Makefile config.status: creating examples/Makefile config.status: creating fuse/Makefile config.status: creating fuzzing/Makefile config.status: creating generator/Makefile config.status: creating golang/Makefile config.status: creating golang/examples/Makefile config.status: creating include/Makefile config.status: creating info/Makefile config.status: creating interop/Makefile config.status: creating interop/nbd-server-tls.conf config.status: creating lib/Makefile config.status: creating lib/libnbd.pc config.status: creating lib/local/libnbd.pc config.status: creating ocaml/Makefile config.status: creating ocaml/META config.status: creating ocaml/examples/Makefile config.status: creating ocaml/tests/Makefile config.status: creating python/Makefile config.status: creating sh/Makefile config.status: creating tests/Makefile config.status: creating tests/functions.sh config.status: creating valgrind/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands ---------------------------------------------------------------------- Thank you for downloading libnbd 1.14.1 This is how we have configured the optional components for you today: Optional library features: TLS support ............................ yes NBD URI support ........................ yes FUSE support ........................... yes Manual pages ........................... yes Bash tab completion .................... yes Language bindings: Go ..................................... yes OCaml .................................. yes Python ................................. yes Server interoperability testing: qemu-nbd ............................... yes qemu-storage-daemon .................... yes nbdkit ................................. no nbd-server ............................. yes Examples: glib example ........................... yes libev example .......................... yes If any optional component is configured ‘no’ when you expected ‘yes’ then you should check the preceding messages and README. Please report bugs back to the mailing list: http://www.redhat.com/mailman/listinfo/libguestfs Next you should type 'make' to build the package, then 'make check' to run the tests. + /usr/local/bin/gmake /usr/local/bin/gmake all-recursive gmake[1]: Entering directory '/tmp/cirrus-ci-build' Making all in generator gmake[2]: Entering directory '/tmp/cirrus-ci-build/generator' gmake[2]: Nothing to be done for 'all'. gmake[2]: Leaving directory '/tmp/cirrus-ci-build/generator' Making all in include gmake[2]: Entering directory '/tmp/cirrus-ci-build/include' /usr/local/bin/gmake -C ../generator stamp-generator gmake[3]: Entering directory '/tmp/cirrus-ci-build/generator' ocamlc.opt -g -annot -safe-string -warn-error +C+D+E+F+L+M+P+S+U+V+Y+Z+X+52-3 -I . -I . \ str.cma unix.cma utils.mli utils.ml state_machine.mli state_machine.ml API.mli API.ml state_machine_generator.mli state_machine_generator.ml C.mli C.ml Python.mli Python.ml OCaml.mli OCaml.ml GoLang.mli GoLang.ml generator.ml -o generator rm -f stamp-generator cd .. && \ OCAMLRUNPARAM=b /tmp/cirrus-ci-build/generator/generator Regenerating the cache, this could take a little while ... written lib/states.h written lib/states.c written lib/states-run.c written lib/libnbd.syms written include/libnbd.h written lib/unlocked.h written lib/api.c written docs/Makefile.inc written docs/api-links.pod written docs/api-flag-links.pod written docs/nbd_set_debug.pod written docs/nbd_get_debug.pod written docs/nbd_set_debug_callback.pod written docs/nbd_clear_debug_callback.pod written docs/nbd_set_handle_name.pod written docs/nbd_get_handle_name.pod written docs/nbd_set_private_data.pod written docs/nbd_get_private_data.pod written docs/nbd_set_export_name.pod written docs/nbd_get_export_name.pod written docs/nbd_set_request_block_size.pod written docs/nbd_get_request_block_size.pod written docs/nbd_set_full_info.pod written docs/nbd_get_full_info.pod written docs/nbd_get_canonical_export_name.pod written docs/nbd_get_export_description.pod written docs/nbd_set_tls.pod written docs/nbd_get_tls.pod written docs/nbd_get_tls_negotiated.pod written docs/nbd_set_tls_certificates.pod written docs/nbd_set_tls_verify_peer.pod written docs/nbd_get_tls_verify_peer.pod written docs/nbd_set_tls_username.pod written docs/nbd_get_tls_username.pod written docs/nbd_set_tls_psk_file.pod written docs/nbd_set_request_structured_replies.pod written docs/nbd_get_request_structured_replies.pod written docs/nbd_get_structured_replies_negotiated.pod written docs/nbd_set_handshake_flags.pod written docs/nbd_get_handshake_flags.pod written docs/nbd_set_pread_initialize.pod written docs/nbd_get_pread_initialize.pod written docs/nbd_set_strict_mode.pod written docs/nbd_get_strict_mode.pod written docs/nbd_set_opt_mode.pod written docs/nbd_get_opt_mode.pod written docs/nbd_opt_go.pod written docs/nbd_opt_abort.pod written docs/nbd_opt_list.pod written docs/nbd_opt_info.pod written docs/nbd_opt_list_meta_context.pod written docs/nbd_add_meta_context.pod written docs/nbd_get_nr_meta_contexts.pod written docs/nbd_get_meta_context.pod written docs/nbd_clear_meta_contexts.pod written docs/nbd_set_uri_allow_transports.pod written docs/nbd_set_uri_allow_tls.pod written docs/nbd_set_uri_allow_local_file.pod written docs/nbd_connect_uri.pod written docs/nbd_connect_unix.pod written docs/nbd_connect_vsock.pod written docs/nbd_connect_tcp.pod written docs/nbd_connect_socket.pod written docs/nbd_connect_command.pod written docs/nbd_connect_systemd_socket_activation.pod written docs/nbd_is_read_only.pod written docs/nbd_can_flush.pod written docs/nbd_can_fua.pod written docs/nbd_is_rotational.pod written docs/nbd_can_trim.pod written docs/nbd_can_zero.pod written docs/nbd_can_fast_zero.pod written docs/nbd_can_df.pod written docs/nbd_can_multi_conn.pod written docs/nbd_can_cache.pod written docs/nbd_can_meta_context.pod written docs/nbd_get_protocol.pod written docs/nbd_get_size.pod written docs/nbd_get_block_size.pod written docs/nbd_pread.pod written docs/nbd_pread_structured.pod written docs/nbd_pwrite.pod written docs/nbd_shutdown.pod written docs/nbd_flush.pod written docs/nbd_trim.pod written docs/nbd_cache.pod written docs/nbd_zero.pod written docs/nbd_block_status.pod written docs/nbd_poll.pod written docs/nbd_aio_connect.pod written docs/nbd_aio_connect_uri.pod written docs/nbd_aio_connect_unix.pod written docs/nbd_aio_connect_vsock.pod written docs/nbd_aio_connect_tcp.pod written docs/nbd_aio_connect_socket.pod written docs/nbd_aio_connect_command.pod written docs/nbd_aio_connect_systemd_socket_activation.pod written docs/nbd_aio_opt_go.pod written docs/nbd_aio_opt_abort.pod written docs/nbd_aio_opt_list.pod written docs/nbd_aio_opt_info.pod written docs/nbd_aio_opt_list_meta_context.pod written docs/nbd_aio_pread.pod written docs/nbd_aio_pread_structured.pod written docs/nbd_aio_pwrite.pod written docs/nbd_aio_disconnect.pod written docs/nbd_aio_flush.pod written docs/nbd_aio_trim.pod written docs/nbd_aio_cache.pod written docs/nbd_aio_zero.pod written docs/nbd_aio_block_status.pod written docs/nbd_aio_get_fd.pod written docs/nbd_aio_get_direction.pod written docs/nbd_aio_notify_read.pod written docs/nbd_aio_notify_write.pod written docs/nbd_aio_is_created.pod written docs/nbd_aio_is_connecting.pod written docs/nbd_aio_is_negotiating.pod written docs/nbd_aio_is_ready.pod written docs/nbd_aio_is_processing.pod written docs/nbd_aio_is_dead.pod written docs/nbd_aio_is_closed.pod written docs/nbd_aio_command_completed.pod written docs/nbd_aio_peek_command_completed.pod written docs/nbd_aio_in_flight.pod written docs/nbd_connection_state.pod written docs/nbd_get_package_name.pod written docs/nbd_get_version.pod written docs/nbd_kill_subprocess.pod written docs/nbd_supports_tls.pod written docs/nbd_supports_uri.pod written docs/nbd_get_uri.pod written python/methods.h written python/libnbdmod.c written python/methods.c written python/nbd.py written ocaml/NBD.mli written ocaml/NBD.ml written ocaml/nbd-c.c written golang/bindings.go written golang/closures.go written golang/wrappers.go written golang/wrappers.h touch stamp-generator gmake[3]: Leaving directory '/tmp/cirrus-ci-build/generator' /usr/local/bin/gmake all-am gmake[3]: Entering directory '/tmp/cirrus-ci-build/include' gmake[3]: Nothing to be done for 'all-am'. gmake[3]: Leaving directory '/tmp/cirrus-ci-build/include' gmake[2]: Leaving directory '/tmp/cirrus-ci-build/include' Making all in common/include gmake[2]: Entering directory '/tmp/cirrus-ci-build/common/include' gmake[2]: Nothing to be done for 'all'. gmake[2]: Leaving directory '/tmp/cirrus-ci-build/common/include' Making all in common/utils gmake[2]: Entering directory '/tmp/cirrus-ci-build/common/utils' /bin/sh ../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-human-size.lo -MD -MP -MF .deps/libutils_la-human-size.Tpo -c -o libutils_la-human-size.lo `test -f 'human-size.c' || echo './'`human-size.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-human-size.lo -MD -MP -MF .deps/libutils_la-human-size.Tpo -c human-size.c -fPIC -DPIC -o .libs/libutils_la-human-size.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-human-size.lo -MD -MP -MF .deps/libutils_la-human-size.Tpo -c human-size.c -o libutils_la-human-size.o >/dev/null 2>&1 mv -f .deps/libutils_la-human-size.Tpo .deps/libutils_la-human-size.Plo /bin/sh ../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-vector.lo -MD -MP -MF .deps/libutils_la-vector.Tpo -c -o libutils_la-vector.lo `test -f 'vector.c' || echo './'`vector.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-vector.lo -MD -MP -MF .deps/libutils_la-vector.Tpo -c vector.c -fPIC -DPIC -o .libs/libutils_la-vector.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-vector.lo -MD -MP -MF .deps/libutils_la-vector.Tpo -c vector.c -o libutils_la-vector.o >/dev/null 2>&1 mv -f .deps/libutils_la-vector.Tpo .deps/libutils_la-vector.Plo /bin/sh ../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-version.lo -MD -MP -MF .deps/libutils_la-version.Tpo -c -o libutils_la-version.lo `test -f 'version.c' || echo './'`version.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-version.lo -MD -MP -MF .deps/libutils_la-version.Tpo -c version.c -fPIC -DPIC -o .libs/libutils_la-version.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../common/include -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -MT libutils_la-version.lo -MD -MP -MF .deps/libutils_la-version.Tpo -c version.c -o libutils_la-version.o >/dev/null 2>&1 mv -f .deps/libutils_la-version.Tpo .deps/libutils_la-version.Plo /bin/sh ../../libtool --tag=CC --mode=link cc -Wall -Werror -Wvla -Wframe-larger-than=5000 -g -O2 -o libutils.la libutils_la-human-size.lo libutils_la-vector.lo libutils_la-version.lo libtool: link: ar cr .libs/libutils.a .libs/libutils_la-human-size.o .libs/libutils_la-vector.o .libs/libutils_la-version.o libtool: link: ranlib .libs/libutils.a libtool: link: ( cd ".libs" && rm -f "libutils.la" && ln -s "../libutils.la" "libutils.la" ) gmake[2]: Leaving directory '/tmp/cirrus-ci-build/common/utils' Making all in lib gmake[2]: Entering directory '/tmp/cirrus-ci-build/lib' /usr/local/bin/gmake all-am gmake[3]: Entering directory '/tmp/cirrus-ci-build/lib' /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-aio.lo -MD -MP -MF .deps/libnbd_la-aio.Tpo -c -o libnbd_la-aio.lo `test -f 'aio.c' || echo './'`aio.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-aio.lo -MD -MP -MF .deps/libnbd_la-aio.Tpo -c aio.c -fPIC -DPIC -o .libs/libnbd_la-aio.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-aio.lo -MD -MP -MF .deps/libnbd_la-aio.Tpo -c aio.c -o libnbd_la-aio.o >/dev/null 2>&1 mv -f .deps/libnbd_la-aio.Tpo .deps/libnbd_la-aio.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-api.lo -MD -MP -MF .deps/libnbd_la-api.Tpo -c -o libnbd_la-api.lo `test -f 'api.c' || echo './'`api.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-api.lo -MD -MP -MF .deps/libnbd_la-api.Tpo -c api.c -fPIC -DPIC -o .libs/libnbd_la-api.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-api.lo -MD -MP -MF .deps/libnbd_la-api.Tpo -c api.c -o libnbd_la-api.o >/dev/null 2>&1 mv -f .deps/libnbd_la-api.Tpo .deps/libnbd_la-api.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-connect.lo -MD -MP -MF .deps/libnbd_la-connect.Tpo -c -o libnbd_la-connect.lo `test -f 'connect.c' || echo './'`connect.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-connect.lo -MD -MP -MF .deps/libnbd_la-connect.Tpo -c connect.c -fPIC -DPIC -o .libs/libnbd_la-connect.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-connect.lo -MD -MP -MF .deps/libnbd_la-connect.Tpo -c connect.c -o libnbd_la-connect.o >/dev/null 2>&1 mv -f .deps/libnbd_la-connect.Tpo .deps/libnbd_la-connect.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-crypto.lo -MD -MP -MF .deps/libnbd_la-crypto.Tpo -c -o libnbd_la-crypto.lo `test -f 'crypto.c' || echo './'`crypto.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-crypto.lo -MD -MP -MF .deps/libnbd_la-crypto.Tpo -c crypto.c -fPIC -DPIC -o .libs/libnbd_la-crypto.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-crypto.lo -MD -MP -MF .deps/libnbd_la-crypto.Tpo -c crypto.c -o libnbd_la-crypto.o >/dev/null 2>&1 mv -f .deps/libnbd_la-crypto.Tpo .deps/libnbd_la-crypto.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-debug.lo -MD -MP -MF .deps/libnbd_la-debug.Tpo -c -o libnbd_la-debug.lo `test -f 'debug.c' || echo './'`debug.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-debug.lo -MD -MP -MF .deps/libnbd_la-debug.Tpo -c debug.c -fPIC -DPIC -o .libs/libnbd_la-debug.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-debug.lo -MD -MP -MF .deps/libnbd_la-debug.Tpo -c debug.c -o libnbd_la-debug.o >/dev/null 2>&1 mv -f .deps/libnbd_la-debug.Tpo .deps/libnbd_la-debug.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-disconnect.lo -MD -MP -MF .deps/libnbd_la-disconnect.Tpo -c -o libnbd_la-disconnect.lo `test -f 'disconnect.c' || echo './'`disconnect.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-disconnect.lo -MD -MP -MF .deps/libnbd_la-disconnect.Tpo -c disconnect.c -fPIC -DPIC -o .libs/libnbd_la-disconnect.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-disconnect.lo -MD -MP -MF .deps/libnbd_la-disconnect.Tpo -c disconnect.c -o libnbd_la-disconnect.o >/dev/null 2>&1 mv -f .deps/libnbd_la-disconnect.Tpo .deps/libnbd_la-disconnect.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-errors.lo -MD -MP -MF .deps/libnbd_la-errors.Tpo -c -o libnbd_la-errors.lo `test -f 'errors.c' || echo './'`errors.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-errors.lo -MD -MP -MF .deps/libnbd_la-errors.Tpo -c errors.c -fPIC -DPIC -o .libs/libnbd_la-errors.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-errors.lo -MD -MP -MF .deps/libnbd_la-errors.Tpo -c errors.c -o libnbd_la-errors.o >/dev/null 2>&1 mv -f .deps/libnbd_la-errors.Tpo .deps/libnbd_la-errors.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-flags.lo -MD -MP -MF .deps/libnbd_la-flags.Tpo -c -o libnbd_la-flags.lo `test -f 'flags.c' || echo './'`flags.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-flags.lo -MD -MP -MF .deps/libnbd_la-flags.Tpo -c flags.c -fPIC -DPIC -o .libs/libnbd_la-flags.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-flags.lo -MD -MP -MF .deps/libnbd_la-flags.Tpo -c flags.c -o libnbd_la-flags.o >/dev/null 2>&1 mv -f .deps/libnbd_la-flags.Tpo .deps/libnbd_la-flags.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-handle.lo -MD -MP -MF .deps/libnbd_la-handle.Tpo -c -o libnbd_la-handle.lo `test -f 'handle.c' || echo './'`handle.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-handle.lo -MD -MP -MF .deps/libnbd_la-handle.Tpo -c handle.c -fPIC -DPIC -o .libs/libnbd_la-handle.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-handle.lo -MD -MP -MF .deps/libnbd_la-handle.Tpo -c handle.c -o libnbd_la-handle.o >/dev/null 2>&1 mv -f .deps/libnbd_la-handle.Tpo .deps/libnbd_la-handle.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-is-state.lo -MD -MP -MF .deps/libnbd_la-is-state.Tpo -c -o libnbd_la-is-state.lo `test -f 'is-state.c' || echo './'`is-state.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-is-state.lo -MD -MP -MF .deps/libnbd_la-is-state.Tpo -c is-state.c -fPIC -DPIC -o .libs/libnbd_la-is-state.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-is-state.lo -MD -MP -MF .deps/libnbd_la-is-state.Tpo -c is-state.c -o libnbd_la-is-state.o >/dev/null 2>&1 mv -f .deps/libnbd_la-is-state.Tpo .deps/libnbd_la-is-state.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-opt.lo -MD -MP -MF .deps/libnbd_la-opt.Tpo -c -o libnbd_la-opt.lo `test -f 'opt.c' || echo './'`opt.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-opt.lo -MD -MP -MF .deps/libnbd_la-opt.Tpo -c opt.c -fPIC -DPIC -o .libs/libnbd_la-opt.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-opt.lo -MD -MP -MF .deps/libnbd_la-opt.Tpo -c opt.c -o libnbd_la-opt.o >/dev/null 2>&1 mv -f .deps/libnbd_la-opt.Tpo .deps/libnbd_la-opt.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-poll.lo -MD -MP -MF .deps/libnbd_la-poll.Tpo -c -o libnbd_la-poll.lo `test -f 'poll.c' || echo './'`poll.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-poll.lo -MD -MP -MF .deps/libnbd_la-poll.Tpo -c poll.c -fPIC -DPIC -o .libs/libnbd_la-poll.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-poll.lo -MD -MP -MF .deps/libnbd_la-poll.Tpo -c poll.c -o libnbd_la-poll.o >/dev/null 2>&1 mv -f .deps/libnbd_la-poll.Tpo .deps/libnbd_la-poll.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-protocol.lo -MD -MP -MF .deps/libnbd_la-protocol.Tpo -c -o libnbd_la-protocol.lo `test -f 'protocol.c' || echo './'`protocol.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-protocol.lo -MD -MP -MF .deps/libnbd_la-protocol.Tpo -c protocol.c -fPIC -DPIC -o .libs/libnbd_la-protocol.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-protocol.lo -MD -MP -MF .deps/libnbd_la-protocol.Tpo -c protocol.c -o libnbd_la-protocol.o >/dev/null 2>&1 mv -f .deps/libnbd_la-protocol.Tpo .deps/libnbd_la-protocol.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-rw.lo -MD -MP -MF .deps/libnbd_la-rw.Tpo -c -o libnbd_la-rw.lo `test -f 'rw.c' || echo './'`rw.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-rw.lo -MD -MP -MF .deps/libnbd_la-rw.Tpo -c rw.c -fPIC -DPIC -o .libs/libnbd_la-rw.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-rw.lo -MD -MP -MF .deps/libnbd_la-rw.Tpo -c rw.c -o libnbd_la-rw.o >/dev/null 2>&1 mv -f .deps/libnbd_la-rw.Tpo .deps/libnbd_la-rw.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-socket.lo -MD -MP -MF .deps/libnbd_la-socket.Tpo -c -o libnbd_la-socket.lo `test -f 'socket.c' || echo './'`socket.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-socket.lo -MD -MP -MF .deps/libnbd_la-socket.Tpo -c socket.c -fPIC -DPIC -o .libs/libnbd_la-socket.o libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-socket.lo -MD -MP -MF .deps/libnbd_la-socket.Tpo -c socket.c -o libnbd_la-socket.o >/dev/null 2>&1 mv -f .deps/libnbd_la-socket.Tpo .deps/libnbd_la-socket.Plo /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-states.lo -MD -MP -MF .deps/libnbd_la-states.Tpo -c -o libnbd_la-states.lo `test -f 'states.c' || echo './'`states.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I.. -I../include -I../common/include -I../common/utils -Dsysconfdir=\"/usr/local/etc\" -Wall -Werror -Wvla -Wframe-larger-than=5000 -pthread -I/usr/local/include -I/usr/local/include/p11-kit-1 -I/usr/local/include/libxml2 -g -O2 -MT libnbd_la-states.lo -MD -MP -MF .deps/libnbd_la-states.Tpo -c states.c -fPIC -DPIC -o .libs/libnbd_la-states.o generator/states-reply-structured.c:511:1: error: non-void function does not return a value in all control paths [-Werror,-Wreturn-type] } ^ 1 error generated. gmake[3]: *** [Makefile:797: libnbd_la-states.lo] Error 1 gmake[3]: Leaving directory '/tmp/cirrus-ci-build/lib' gmake[2]: *** [Makefile:563: all] Error 2 gmake[2]: Leaving directory '/tmp/cirrus-ci-build/lib' gmake[1]: *** [Makefile:550: all-recursive] Error 1 gmake[1]: Leaving directory '/tmp/cirrus-ci-build' gmake: *** [Makefile:475: all] Error 2 Exit status: 2 Build failed: https://cirrus-ci.com/build/5251575521214464 section_end:1660310105:step_script section_start:1660310105:cleanup_file_variables Cleaning up project directory and file based variables section_end:1660310106:cleanup_file_variables ERROR: Job failed: exit code 1